Skip to content
Aback Chess
Sponsors

Bishop vs knight: which is better, and when?

Bishop vs knight explained: when a bishop is better, when a knight is, good knight against bad bishop, the bishop pair, and endgames with each piece.

Endgames9 min readUpdated

In short

A bishop and a knight are both worth about three pawns, and neither is better in general. A bishop is usually stronger in open positions with pawns on both wings, because it crosses the board in one move. A knight is usually stronger in closed positions, on a protected outpost, or against a bad bishop hemmed in by its own pawns. Two bishops together, the bishop pair, are a real advantage in open positions.

Few questions come up as often in chess as whether to swap a bishop for a knight. Both are minor pieces, both are counted as roughly three pawns, and in most positions they are close in value. But they move in completely different ways, and the position decides which one is better. Knowing why lets you make the right exchanges in the middlegame and steer towards endings where your piece is the stronger one.

1Is a bishop better than a knight?

Not in general. The traditional values give both three pawns, and many players and authors since have rated the bishop a fraction higher, mostly because of what two bishops can do together. On its own, the difference is small next to the position. A good knight beats a bad bishop, and a good bishop beats a knight with no squares. The real question is always which piece suits this structure.

FeatureBishopKnight
How it movesAny distance along diagonalsAn L-shaped jump of two squares and one
Squares it can reachOnly squares of one colourBoth colours, alternating on every move
Crossing the boardOne move along an open diagonalSeveral moves
Blocked by pawnsYes, its diagonals can be closedNo, it jumps over them
Waiting movesCan pass a move while still guarding the same diagonalCannot lose a tempo: it returns to a square only after an even number of moves
Best inOpen positions, pawns on both wingsClosed positions, outposts, pawns on one wing
How the two minor pieces differ.

2When is a bishop better than a knight?

  • Open positions. With few pawns in the centre, the bishop's diagonals are long, and it reaches both sides of the board at once.
  • Pawns on both wings. A bishop can defend one side while attacking the other. A knight needs several moves to get from one wing to the other and can only be in one place.
  • Passed pawns. A bishop stops a passed pawn from a distance, from any square on the diagonal it must cross. A knight has to come close.
  • Fights for tempo. A bishop can make a waiting move without changing what it controls, which matters in endings decided by zugzwang. A knight cannot lose a move this way.
Pawns on both wings and an open centre. The bishop on d3 already reaches a6 on one side and the pawn on h7 on the other, while the knight on d7 needs several moves to get from one wing to the other.Open on the board

3When is a knight better than a bishop?

  • Closed positions. With locked pawn chains, the bishop's diagonals are blocked, while the knight jumps over the pawns.
  • Outposts. A knight on a square in enemy territory that no enemy pawn can attack is often the strongest minor piece on the board.
  • Against a bad bishop. When the opponent's pawns are fixed on the colour of their own bishop, a knight can attack them on both colours.
  • Pawns on one wing only. A short-range piece is less of a handicap when all the play is in one area.

4What is a bad bishop?

A bishop is called bad when its own pawns are fixed on squares of its colour. The pawns block its diagonals, and the squares of the other colour, which the bishop can never reach, become weak. A classic example comes from the French Defence.

1.e4 e6 2.d4 d5 3.e5The French Defence, Advance Variation, after 3.e5. Black's bishop on c8 moves on light squares, and Black's pawns on e6 and d5 stand on light squares in front of it.Open on the board

A bad bishop is not always a weak piece; it can still defend the pawns that block it, and in the French Black often works to trade it off or to change the pawn structure with breaks such as ...c5 and ...f6. But in an ending where the pawns are fixed, a bad bishop has little to attack and nothing to stop a knight from landing on the squares of the other colour.

5Good knight vs bad bishop

This is the textbook case of the knight being the better piece. The knight sits on an outpost of the colour the bishop does not control, and the bishop is stuck behind its own pawns.

Good knight against bad bishop. The white knight on d5 stands on a light square that no black pawn can attack, and the bishop on d8, which moves on dark squares, can never challenge it. Six of Black's seven pawns stand on dark squares, the colour of their own bishop.Open on the board

Look at what each piece can do. The knight on d5 can never be driven away: Black has no c-pawn, and the e-pawn has already gone past e6, and the bishop cannot touch a light square. From d5 it eyes b6, c7, e7 and f6, and it can head for the queenside or the kingside pawns as needed. The bishop on d8 spends its time defending pawns on dark squares. Positions like this are the reason players avoid fixing all their pawns on the colour of their own bishop.

6What is the bishop pair?

The bishop pair means having both bishops while the opponent has a bishop and a knight, or two knights. Together the two bishops cover squares of both colours, so the main weakness of a single bishop disappears. In open positions the pair is a recognised advantage: in Larry Kaufman's well-known study of master games, the pair was worth about half a pawn on top of the pieces themselves. That is why many openings revolve around one side giving up the bishop pair for something else.

1.e4 e5 2.Nf3 Nc6 3.Bb5 a6 4.Bxc6 dxc6The Ruy Lopez, Exchange Variation. White has given up the bishop on b5 for the knight on c6, so Black has the bishop pair. In return Black has doubled c-pawns.Open on the board
1.d4 Nf6 2.c4 e6 3.Nc3 Bb4 4.a3 Bxc3+ 5.bxc3The Nimzo-Indian Defence, Sämisch Variation. Black has taken the knight on c3 with the bishop, so White has the bishop pair, with doubled c-pawns.Open on the board

Both openings are about the same trade: the side with the bishop pair hopes the position opens up, and the other side keeps it closed, plays against the weaker pawns, or aims for an ending where the doubled pawns count. Neither side is simply better. When you have the pair, open the position, trade pawns rather than pieces, and avoid swapping one of the bishops off cheaply. When you face it, keep the pawns locked and look for outposts for your knights.

7Bishop vs knight in the endgame

  • With pawns on both wings, the bishop is usually the more comfortable piece, especially if it has passed pawns to support or stop.
  • With all the pawns on one wing, the knight holds its own, and many such endings are drawn.
  • A knight has the most trouble stopping a far-advanced rook's pawn, and it is weaker near the edge of the board in general, where it controls fewer squares.
  • A bishop and a knight together can force mate against a lone king, but it is one of the hardest basic mates. A single bishop or a single knight cannot mate at all.
  • The king's activity matters as much as the minor piece. A centralised king with a knight beats a passive king with a bishop more often than the piece values suggest.

One endgame every player should know is the wrong rook's pawn. A bishop and a rook's pawn against a lone king can be a draw, even with the extra piece.

The wrong bishop. White's bishop on c1 moves on dark squares, but a8, the a-pawn's promotion square, is light. With the black king in the corner, this is a textbook draw.Open on the board

The bishop can never attack a8, so the black king cannot be driven out of the corner, and White has to be careful not to stalemate it. The problem is the colour: a light-squared bishop could take a8 away from the king, which is why this one is called the wrong bishop. When you are a piece up in an ending, it is worth checking this before trading off the last pawns.

8Should you trade a bishop for a knight?

  1. 1Look at the pawns. If the centre is open or likely to open, keep the bishop. If it is locked, the knight may be the better piece to keep.
  2. 2Look at the colours. If your pawns stand on the colour of your bishop, that bishop is the one to trade. If the opponent's pawns are fixed on your bishop's colour, keep it: it has targets.
  3. 3Look for outposts. If your knight has a square in the enemy camp that no pawn can attack, keep the knight.
  4. 4Count the bishops. Giving up a bishop also gives the opponent the bishop pair. Make sure you get something for it, such as doubled pawns, time or a strong knight.
  5. 5Think about the ending. If the position is heading towards an ending with pawns on both wings, the bishop is usually the piece you want.

9Common mistakes

  • Trading a good bishop for a knight in an open position for no gain, just because the pieces are worth the same on paper.
  • Putting your pawns on the colour of your own bishop, which hems it in and weakens the other colour.
  • Leaving a knight on the edge of the board, where it controls half the squares it would in the centre.
  • Opening the position when you have a knight against a bishop, or closing it when you have the bishop pair.
  • Assuming an extra bishop wins any ending, without checking for a wrong rook's pawn.

Analysis board

Set up a bishop against a knight on the analysis board and see how the engine handles each piece.

Frequently asked questions

Which is better, a bishop or a knight?

Neither in general. Both are worth about three pawns. A bishop is usually better in open positions with pawns on both wings; a knight is usually better in closed positions, on an outpost, or against a bad bishop.

Why do players value the bishop pair?

Two bishops cover squares of both colours, so together they have none of the single bishop's blind spot. In open positions they control long diagonals on both sides of the board, which makes them very hard for knights to match.

What makes a bishop bad?

Its own pawns fixed on squares of its colour. They block its diagonals and leave the squares of the other colour weak, where enemy pieces, especially knights, can settle.

Can a bishop and a knight checkmate a king?

Yes, a king, bishop and knight can force mate against a lone king, but the technique is long and difficult, and it has to be done within the fifty-move rule. A king with only a bishop or only a knight cannot mate.

Is a knight better in the endgame?

Only in some endgames. Knights do well when all the pawns are on one side or the pawn structure is locked. With pawns on both wings or passed pawns racing, the bishop's long range usually makes it the stronger piece.

Should I give up a bishop for a knight early in the game?

Only for a reason, such as doubling the opponent's pawns, winning time or gaining control of a key square. Otherwise keep the bishop, because giving it up hands your opponent the bishop pair.